Sailor Jupiter Hueforge

Project: Sailor_Jupiter.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 156x234mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.8mm and the Actual Thickness is 2.72mmFilaments Used: (* = Owned) #000000 * PLA Basic Black Transmission Distance: 0.1 #00ae42 * PLA Basic BambuLab Green Transmission Distance: 2.6 #814100 * PLA Brown Transmission Distance: 2.8 #00358e * PLA Basic Blue Transmission Distance: 4 #ffffff * PLA Basic Jade White Transmission Distance: 5.8 #c00d1e * PLA Basic Red Transmission Distance: 3.7 #fce300 * PLA Basic Yellow Transmission Distance: 5.2This print uses 7 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to BambuLab Green At layer #8 (0.72mm) swap to Black At layer #9 (0.8mm) swap to Brown At layer #12 (1.04mm) swap to Black At layer #13 (1.12mm) swap to Blue At layer #15 (1.28mm) swap to Jade White At layer #17 (1.44mm) swap