SAILOR MOON

Project: sailor1.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 95.63x170mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyTerra Army Blue Transmission Distance: 0.3 PLA BambuLab Basic BambuLab Green Transmission Distance: 4 PLA Bambulab Basic Blue Transmission Distance: 2 PLA BambuLab Matte Sakura Pink Transmission Distance: 3 PLA BambuLab Matte Lilac Purple Transmission Distance: 2 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 8 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Army Blue At layer #10 (0.88mm) swap to BambuLab Green At layer #12 (1.04mm) swap to Blue At layer #14 (1.2mm) swap to Sakura Pink At layer #19 (1.6mm) swap to Lilac Purple At layer #22 (1.84mm) swap to Beige At la