SAILOR MOON

Project: sailor2.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 90x180mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA PolyTerra Army Blue Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 5 PLA Bambulab Basic BlueTransmission Distance: 2 PLA BambuLab Matte Lilac Purple Transmission Distance: 2 PLA BambuLab Matte Sakura Pink Transmission Distance: 3 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Matte Ivory White Transmission Distance: 4This print uses 7 unique filamentsSwap Instructions: Start with Army Blue At layer #9 (0.8mm) swap to Red At layer #11 (0.96mm) swap to Blue At layer #12 (1.04mm) swap to Lilac Purple At layer #17 (1.44mm) swap to Sakura Pink At layer #23 (1.92mm) swap to Beige At layer #25 (2.08mm) swap to Ivory White for the rest.