Slicer Discord
Sailor Moon – 3D-Druckmodell von MakerWorld MakerWorld
Hueforge & Lithophane

Sailor Moon

43 Downloads
48 Likes
23 Makes
Zum Modell
Sailor Moon from Japanese Manga series by Naoko Takeuchi.Available in 2 print profiles (200x200mm and 150mmx150mm)----------------------------A commercial license to sell printed copies is available on my Patreon:https://www.patreon.com/busykikibeeAs part of your membership you will also have access to exclusive files available only on Patreon.---------------------------- Project: Sailor MoonPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.64mmThe Max Depth is 2.5mm and the Actual Depth is 2.4mm This print uses 7 unique filamentsPLA BambuLab Matte Dark Blue PLA BambuLab Matte Marine Blue PLA BambuLab Matte Scarlet Red PLA BambuLab Matte Lemon YellowPLA BambuLab Matte Sakura Pink PLA BambuLab Matte Ice Blue PLA BambuLab Matte Ivory White Swap Instructions:Start with Dark BlueAt 0.88mm swap to Marine BlueAt 1.04mm swap to Scarlet RedAt 1.28mm swap to Lemon YellowAt 1.
Kategorie
Hueforge & Lithophane
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Warum?
großer Druck
Einteilig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 2/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Mindest-Druckbett
200 mm (Groß)
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen