Sailor Moon Picture

Project: 01.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 143.37x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.1mm and the Actual Depth is 2.2mmFilaments Used: PLA+ Esun Dark Blue Transmission Distance: 2 PLA BambuLab Basic Orange Transmission Distance: 5 PLA+ Esun Yellow Transmission Distance: 6 PLA+ Sunlu Beige Transmission Distance: 7.6This print uses 4 unique filamentsSwap Instructions: Start with Dark Blue At layer #8 (0.72mm) swap to Orange At layer #10 (0.88mm) swap to Yellow At layer #13 (1.12mm) swap to Beige for the rest.