Thingiverse
Sailor spinner
par pauerbuk
62
Téléchargements
80
Likes
0
Makes
The "unconventional" spinner series continues. This time I was inspired by the rudder of the old galleons, which we have seen many times in pirate films.
To reduce the thickness, I used eight 6MA nuts, 10 mm. hexagon, and the bearing is, as usual, the standard skateboard 608, 22 mm in diameter. As always, it is not necessary any glue to hold everything together.
I downloaded two versions: one called "Timone_centrale", which is much more like a rudder, but needs supports, a bit of post print jobs, and a pretty accurate printer; and a "Timone_centrale_easy" that does not need supports and It prints easily.
The lids and the bearing caps are suitable for both models.
To reduce the thickness, I used eight 6MA nuts, 10 mm. hexagon, and the bearing is, as usual, the standard skateboard 608, 22 mm in diameter. As always, it is not necessary any glue to hold everything together.
I downloaded two versions: one called "Timone_centrale", which is much more like a rudder, but needs supports, a bit of post print jobs, and a pretty accurate printer; and a "Timone_centrale_easy" that does not need supports and It prints easily.
The lids and the bearing caps are suitable for both models.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
