Sakamoto

Project: sakamoto.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 141.41x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2mmFilaments Used: PLA jayo Black Transmission Distance: 0.3 PLA jayo Basic Gray Transmission Distance: 3 PLA jayo Grey claire Transmission Distance: 1 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA jayo White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #10 (0.88mm) swap to Grey At layer #14 (1.2mm) swap to Yellow At layer #18 (1.52mm) swap to White for the rest.