Sakura D5 High ESC Mount

[My Other Design](https://www.thingiverse.com/gadoga_com/designs)

Feel free to sell the end product (printed material) for your profit if you want it, just don’t sell the design.

Note:
When printing ESC-Plate, you might want to slow down printing speed to 50% or slower for the first layer to make sure all filament attached nicely on the print bed. You can set back to normal speed after the first layer.

Slice the .stl file directly using Cura. If you try to "fix it" or "clean it" using other software, it might give unwanted result. Just check the printing simulation to make sure all is fine. I always test print and test the end result myself, before I upload any of my design.

I design it to work fine with Ender 3 V2 standard setting (no horizontal expansion edit). It might work differently with your printer tolerance, so I suggest to test print first.

Use three M2 x 8mm screw to attach ESC-Plate

Installation: https://www.youtube.com/watch?v=qkhOYMPMfXo