Samick Sage Vertical Wall Mount

I modified the original file to have extend the Z axis. This let's my samick sage fit inside and not slide out. I also added two screw holes for 4mm screws so you don't need to use double sided tape. I would recomend you print with 6 walls to increase the strength. I printed with 4 walls and I can hear cracking when I slide the bow in… Although I haven't had issues with tearing. I also wrapped the two grips with electrical tape to make sure the bow has some more friction and so it wouldn't scratch the bow. I printed it in black Silk PLA which is probably the worst option (very low strength).I recommend PETG or at least regular PLA.Seems to work well, thank you to the original author.