Thingiverse
Samsung T7 SSD Mount
by 22Frets
7
Downloads
9
Likes
0
Makes
Tray to mount a Samsung T7 SSD under a desk or on the wall.
Ventilation all around and leaves 1mm between the drive and the mounting surface for additional ventilation.
Snug fit for my 500GB T7 (without the fingerprint sensor). If you're printing with a brittle filament might want to scale it a tiny bit (2-3%) to make for a looser fit.
Depending on your printer you can print either with support only "touching buildplate" or full support.
Ventilation all around and leaves 1mm between the drive and the mounting surface for additional ventilation.
Snug fit for my 500GB T7 (without the fingerprint sensor). If you're printing with a brittle filament might want to scale it a tiny bit (2-3%) to make for a looser fit.
Depending on your printer you can print either with support only "touching buildplate" or full support.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
