Samurái Hueforge 武士

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used:     PLA BambuLab Basic Black Transmission Distance: 0.6     PLA PolyLite Stone Blue Transmission Distance: 0.5     PLA PolyTerra Sakura Pink Transmission Distance: 2.8     PLA BambuLab Basic Jade White Transmission Distance: 5 Swap Instructions:     Start with Black     At layer #8 (0.72mm) swap to Stone Blue     At layer #15 (1.28mm) swap to Sakura Pink     At layer #20 (1.68mm) swap to Jade White for the rest