Samurai 2 - Hueforge

This is 4 color HueForge of Samurai in field with castle in background Do not adjust the thickness (Z) in your slicer!! The layers will not come out right. You can adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 180x180mm in sizeYou may print at higher layer heights below the Min Depth of 0.4mmThe Max Depth is 1.8mm and the Actual Depth is 1.8mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA DevilDesign Gray Transmission Distance: 1.7PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #6 (0.56mm) swap to Blue GrayAt layer #10 (0.88mm) swap to GrayAt layer #14 (1.2mm) swap to Jade White for the rest.