Slicer Discord
Samurai Archer Hueforge – 3D printable model from MakerWorld MakerWorld
Hueforge & Lithophane

Samurai Archer Hueforge

39 Downloads
28 Likes
21 Makes
Go to Model
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 171.57x240mm in sizeYou may print at higher layer heights below the Base Thickness of 0.8mmThe Max allowed Thickness is 2.56mm and the Actual Thickness is 2.56mm #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 #646c74 PLA Copymaster 3D Grey Transmission Distance: 1.5 #080a0d PLA PolyLite Black Transmission Distance: 0.3 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4This print uses 4 unique filamentsSwap Instructions: Start with Jade White At layer #13 (1.12mm) swap to Grey At layer #19 (1.6mm) swap to BlackBorder Only Colors from here until the end. At layer #22 (1.84mm) swap to Red for the rest. Check out my other hueforges<img src="https://makerworld.bblmw.com/makerworld/model/DSM0
Category
Hueforge & Lithophane
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Low confidence
Why?
large print
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 2/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
PLA
Min. bed size
240 mm (Large)
Software
Cura, PrusaSlicer, or similar
Same designer, more platforms

Hadukis also publishes on

12 additional models across 1 more platforms

Verified by matching model titles across platforms.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection