Samurai Champloo

Project: SUNSET.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 230x129.38mm in sizeYou may print at higher layer heights below the Base Thickness of 1.12mmThe Max allowed Thickness is 2.88mm and the Actual Thickness is 2.88mmFilaments Used: #061717 PLA Bambu Black Transmission Distance: 0.1 #d40021 PLA Elegoo Red Transmission Distance: 3.7 #ff6a13 PLA BambuLab Basic Orange Transmission Distance: 5 #ffffff PLA Bambu White Transmission Distance: 6.2This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #16 (1.36mm) swap to Red At layer #23 (1.92mm) swap to OrangeBorder Only Colors from here until the end. At layer #28 (2.32mm) swap to WhiteThis slider is set higher than the mesh depth. It is not affecting your final mesh. Consider removing it. At layer #37 (3.04mm) swap to Black for the rest.