Thingiverse
Samurai Helmet
di MikeLand
768
Download
1.9k
Likes
2
Makes
This is my Samurai helmet I put together Printed on My Flashforge Adventurer m5 Pro
Parts cut to Fit a 250 x250 build plate
The first ring is the most difficult to attach I applied glue and clamped the ring to the helmet.
Make sure you center it well on the helmet.
Then I plastic welded the ring inside of the helmet as well this might be overkill.
Also, I drilled out the top holes on the ring and through the helmet, I tried to add the holes to the helmet but could never get the alignment right.
The other rings are sewn in place with gold string.
The curls I attached by plastic welding to the first ring you could probably use epoxy for this I found melting the plastic together with a soldering iron works great for me.
Parts cut to Fit a 250 x250 build plate
The first ring is the most difficult to attach I applied glue and clamped the ring to the helmet.
Make sure you center it well on the helmet.
Then I plastic welded the ring inside of the helmet as well this might be overkill.
Also, I drilled out the top holes on the ring and through the helmet, I tried to add the holes to the helmet but could never get the alignment right.
The other rings are sewn in place with gold string.
The curls I attached by plastic welding to the first ring you could probably use epoxy for this I found melting the plastic together with a soldering iron works great for me.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!