Samurai hueforge

if you want to scale, do it only with x and y axis, Z must be the same as original. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Red Transmission Distance: 4PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 3 unique filaments Swap Instructions:Start with BlackAt layer #7 (0.64mm) swap to RedAt layer #15 (1.28mm) swap to Ivory White for the rest.