Sandpaper box

The drawer box is designed to hold full sheets of sandpaper. You might choose to print all paper drawers or there is a double height drawer that I use for various sanding blocks.It does require some assembly and gluing. The parts have alignment pins designed in. There is a feature on the slide that should stop the drawer when pulling it out. If you want to pull the drawer out all the way lift the front while pulling.There is a hex pattern in the side panels. If you want to change the filament that it uses: It is easiest to set the object to the inset color. Then in the slicer select the main object for the side and set its color.Several of the plates you need to print several copies. The top and bottom parts need two copies. The drawers you choose the combinations that fit. You might choose 7 short, or 3 tall and 1 short, or as I did 1 tall and 5 short. The plate name is label with the number of prints. If no number is given 1 is needed.It is maximized to fit on a 256mm bed size.