Sandra Bullock Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 120x120mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA Geeetech Black PLA Superfilament Grey PLA Geeetech Silk Silver PLA Geeetech WhiteThis print uses 4 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Grey At layer #15 (1.28mm) swap to Silk Silver At layer #18 (1.52mm) swap to White for the rest. The "floating regions" warning can be ignored. No supports are required.