Slicer Discord
SanDsik E61 Storage box – 3D printable model from MakerWorld MakerWorld
Organizers

SanDsik E61 Storage box

51 Downloads
13 Likes
15 Makes
Go to Model
The SanDisk E61 portable hard drive is very compact, but its data cable and adapter are easy to lose when stored separately. So, I designed this protective case, which not only protects the E61 hard drive but also stores the data cable and adapter. The adapter is inserted into the slot at the top left of the hard drive compartment. One end of the data cable is placed in the slot above the adapter, while the other end is secured in the bottom right slot of the case. The middle of the cable is clamped in place. A piece of cushioning foam on the hard drive cover protects and secures the E61 hard drive.----------------------------------------------------------------------if you support my design, help me replace filament and make updates, thank to tip me: <a href=&#34;https://www.paypal.me/andywangcn72&#34; target=&#34;_blank&#34;>PayPal me</a>. Thank you.
Category
Organizers
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Low confidence
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
PLA
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection