Thingiverse
S&T K98 Scope Mount
di NAME2410
23
Download
39
Likes
0
Makes
This is a scope mount for the S&T K98 or any other K98 with this type of side mount.
The original mount is quiet expensive and you cant use the scope you want.
To screw the picatinny rail on top, 2 m4x12 countersunk screw and screw nuts are needed.
A small layer hight is recommended( i use 0.2).In order to achieve a flatter surface on the mount, support with a overhang angle of 40° can be used( dont forget to use supportblockers for the holes).
If you have any questions feel free to ask.
The original mount is quiet expensive and you cant use the scope you want.
To screw the picatinny rail on top, 2 m4x12 countersunk screw and screw nuts are needed.
A small layer hight is recommended( i use 0.2).In order to achieve a flatter surface on the mount, support with a overhang angle of 40° can be used( dont forget to use supportblockers for the holes).
If you have any questions feel free to ask.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
![[WIP] MLOK K98 Bayonet Lug](/imgproxy.php?url=https%3A%2F%2Fmedia.printables.com%2Fmedia%2Fprints%2F478982%2Fimages%2F3925436_40cfe385-c51a-4403-9eb3-c8d7126cbb4e%2Fbayonet-lug-watermark.jpeg&w=400&h=300)