Sanibel Florida Lighthouse

Project: SanibelLightHouse2024#2.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 137.88x245.12mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA Bambu Black Transmission Distance: 0.3 PLA BambuLab Matte Dark Brown Transmission Distance: 2 PLA BambuLab Matte Pine Green Transmission Distance: 1 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Matte Ivory White Transmission Distance: 4This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Dark Brown At layer #12 (1.04mm) swap to Pine Green At layer #14 (1.2mm) swap to Blue At layer #20 (1.68mm) swap to Ivory White for the rest.