Santa Fe Train Hueforge

Santa Fe Train Hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 1.1mmThe Max Depth is 3.6mm and the Actual Depth is 3.6mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.2PLA BambuLab Basic Dark Gray Transmission Distance: 0.1PLA BambuLab Basic Gray Transmission Distance: 0.2PLA BambuLab Basic Silver Transmission Distance: 0.6PLA PolyLite Azure Blue Transmission Distance: 3.4PLA PolyLite Wine Red Transmission Distance: 1.7PLA PolyLite Lemon Yellow Transmission Distance: 5.7PLA BambuLab Basic Jade White Transmission Distance: 5.7This print uses 8 unique filaments ***attached .3mf file prints the first 6 layers at 0.16mm then the rest at 0.08mm for faster print time******the layer numbers will be different but the layer height will be the same*** Swap Instructions:Start with BlackAt layer #16 (1.36mm) swap to Dark GrayAt layer #17 (1.44mm) swap