Slicer Discord
Sapphire Plus Logos – Modelo 3D imprimible de MakerWorld MakerWorld
3D Printer Accessories

Sapphire Plus Logos

4 Descargas
0 Likes
0 Makes
Ver Modelo
SummaryI found the logos off the printer do not fit the rest of the parts I created for the printer so I decided to design, print and glue them in place. Maybe someone has the same issue.Logo Square:The square logo next to the display is too small to glue every single peace so I designed a frame around it and made the font a bit bigger. To get two colors with a regular 3D Printer you must print the logo first in one color and with 0.12 resolution. Afterwards you print the frame in another color on top with at least the first layer at 0.2 or better 0.3 (depends on your bed). I needed 3 attempts to get a satisfying result.Logo Long:Depending on the size of your bed you can print the logo either as it is (Logo_Long_Original.stl) or use the Logo_Long_Print_All.stl. I also attached each character separate if anyone needs. Print the logo with 0.12 resolution. It will be a very thin character which should fit exactly on the existing one on the top cover of the printer. Note that the "P" in th
Categoría
3D Printer Accessories
Fuente
MakerWorld
Publicado
Actualizado
Lo que necesitas para imprimir: Intermedio Baja confianza
Pieza única
Soportes 1/3
Ensamblaje 0/3
Ajustes 1/3
Tamaño de cama 0/3
Postproceso 1/3
Impresora
FDM / FFF
Formato de archivo
STL
Material
PLA
Postprocesado
Pegado
Software
Cura, PrusaSlicer o similar
Mismo diseñador, más plataformas

MagicHappenZ también publica en

31 modelos adicionales en 2 plataformas más

Verificado por coincidencia de títulos de modelos entre plataformas.
Aún no hay valoraciones
Aún no hay comentarios – ¡sé el primero!

Modelos similares

6 Sugerencias
Feed Blog Slicer Calculadora Búsqueda por imagen Enviar Contacto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Añadir a colección