Thingiverse
Sapphire Pro/Plus Direct Drive
di 8jack
96
Download
70
Likes
0
Makes
The mod is for the default Hotend.
I want to use the push fitting on outside from the extruder so i made an slightly higher base and not to much waste material.
Information for installing:
Use 4x M3 8mm screws, the original is to short
The bowden between Hotend and Extruder is ~93 mm if you use an full metal heatbreak like me.
If you use the PTFE default heatbreak add 18mm to the above.
I want to use the push fitting on outside from the extruder so i made an slightly higher base and not to much waste material.
Information for installing:
Use 4x M3 8mm screws, the original is to short
The bowden between Hotend and Extruder is ~93 mm if you use an full metal heatbreak like me.
If you use the PTFE default heatbreak add 18mm to the above.
8jack pubblica anche su
30 modelli aggiuntivi su altre 1 piattaforme
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
