Slicer Discord
SAS boyz mob (pre-supported) – 3D printable model from MyMiniFactory MyMiniFactory
Characters & Creatures

SAS boyz mob (pre-supported)

0 Downloads
69 Likes
0 Makes
Go to Model
SAS boyz are the sneakiest of all greenskin mobs. They're so 'kovert' that most bosses don't even know they exist. These boyz have nicked the most valuable gear like flame throwers, sniper rifles, bombs, loads of blades and shanks. They even use non-orc tech like radios and riot shields. One lad has a claymore mine taped to his shield, perfect for breaching doors! He also carries a brick, because sometimes the best dakka is just throwing a brick at gitz. Runtz often hang around SAS boyz because they get to perform special jobs, like drive the ATV into enemies (definitely not loaded with C4), or dress up like a real life human commissar to confuse enemies! This set of 12 orc miniature are monopose, designed this way to get as much personality and character into them as possible. The set comes with 32mm bases for the boyz, and 25mm base for the runtz. Folder includes both supported and unsupported parts, as well as the LYS file, in case you need to adjust your supports. Digital downl
Category
Characters & Creatures
Source
MyMiniFactory
Published
What you need to print this: Intermediate Medium confidence
Why?
supports needed
Single piece Supports required
Supports 2/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
Min. bed size
50 mm (Small)
Software
Cura, PrusaSlicer, or similar
Frequently Asked Questions
Which 3D printer is suitable for SAS boyz mob (pre-supported)?
Any FDM printer should handle SAS boyz mob (pre-supported) just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.
Does SAS boyz mob (pre-supported) need supports when printing?
Yes, SAS boyz mob (pre-supported) will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.
What file format is SAS boyz mob (pre-supported) available in?
SAS boyz mob (pre-supported) is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MyMiniFactory.
Is SAS boyz mob (pre-supported) free to download?
Yes, SAS boyz mob (pre-supported) is available as a free download through MyMiniFactory. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection