Sauron Hueforge

Sauron Hueforge!!! Printed in 5 colors. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Do NOT adjust the thickness (Z),You CAN adjust the other dimensions (X,Y) though to make it bigger or smaller. The Model is 145.45x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 5 unique filaments Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #13 (1.12mm) swap to Orange At layer #16 (1.36mm) swap to Yellow At layer #19 (1.6mm) swap to Jade White for the rest.