Thingiverse
SAWYER SQUEEZE DRIP CAP
por Bombastic3D
14
Descargas
16
Likes
1
Makes
***2024-07-01: I've updated the model to be lower profile and have improved printability***
3D MODEL DESCRIPTION
Print in place cap for your Sawyer Squeeze, avoid drips when stored away in your pack.
For the unfiltered side of your sawyer squeeze water filter.
Print in place swivel so the cap can turn freely and is secured to the filter so you don't lose it.
Can use a length of 550 paracord, remove one internal core strand and tie it around the groove of the filter.
Included .stl/.step/.3mf files
Will attach my .3MF file, but pretty standard settings;
FDM
15% infill
2 wall
No supports needed
Printed in PLA or PETG
3D MODEL DESCRIPTION
Print in place cap for your Sawyer Squeeze, avoid drips when stored away in your pack.
For the unfiltered side of your sawyer squeeze water filter.
Print in place swivel so the cap can turn freely and is secured to the filter so you don't lose it.
Can use a length of 550 paracord, remove one internal core strand and tie it around the groove of the filter.
Included .stl/.step/.3mf files
Will attach my .3MF file, but pretty standard settings;
FDM
15% infill
2 wall
No supports needed
Printed in PLA or PETG
Bombastic3D también publica en
38 modelos adicionales en 2 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
