SC126 STACKED Enclosure

This is an enclosure for Steve Cousin's SC126 Z180 Single Board Retro-style computer.
It is designed to house the SC126 with two additional mezzanine circuit cards that can be found on EasyEDA by search for "SC126." And image of the stack is provided.

It was printed using MatterHackers MH Build PLA Blue. The print was reliable and repeatable. The supports were customized using Simplify3D such that only 90 degree overhangs received support. Most of the other openings did not require support.

There are the following major STL components:
1. The Base Enclosure Bottom
2. The Enclosure Top that also accommodates the Floppy Disk shell and drive as well as a 1.8" SSD shell and drive.
3. An alternate enclosure top that does nto include space for the drives mentioned in 2, above.
4. The Floppy Drive Shell
5. The 1.8" SDD Shell
6. The SC126 Board Base Bar for use with the SC126 when installed
7. The Mezzanine Card separators (2). Note that they are not identical. The design requir