Thingiverse
SCAD scalable Mitre slide
by BobL
1
Downloads
5
Likes
0
Makes
This is a basic mitre slide with the ability to vary any parameter using SCAD
It uses two M6 screws/bolts and 2 M6 nuts
the handle/knob uses a 60mm long hex head bolt and one M6 nut.
The mitre uses a 25mm socket heated bolt and an M6 nut
The STL file provided suits a slot that is 19.5 mm wide and 10.5 mm thick and suits a standard 6" wide belt and 9" Disc sanding machine.
It uses two M6 screws/bolts and 2 M6 nuts
the handle/knob uses a 60mm long hex head bolt and one M6 nut.
The mitre uses a 25mm socket heated bolt and an M6 nut
The STL file provided suits a slot that is 19.5 mm wide and 10.5 mm thick and suits a standard 6" wide belt and 9" Disc sanding machine.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!