Scalable DIY Shelf

A set of parts to create shelves of different sizes.
I created this set because I needed a shelf to the kid's room, but I did not find anything suitable in color and size.

I also wanted to use ready-made wooden parts from local store without having to modify them.

Parts List for this project:
>To print: (I used PETG with 40% infill and 3 perimeters with 0.3mm nozzle)
+ 4x Leg (with supports)
+ 1x LegCenter (with supports)
+ 4x Mid (with supports)
+ 4x MidJoint (with supports)
+ 4x Top (with supports)
+ 6x LowerThrust_dual (no supports)
+ 6x UpperThrust_left (supports for first 3 layers)
+ 6x UpperThrust_right (supports for first 3 layers)

>To buy:
+ 4x 1000mm x 500mm x 16mm boards
+ 4x 1000mm x d30mm bars
+ 4x 500mm x d30mm bars
+ 12x 500mm d15mm bars
+ M4 30mm screws and nuts
+ Lots of wood screws

IMPORTANT! Inner hole diameter for the mouns is 28.65mm and 14.40 for thrusts. If you need exact sizes (30mm and 15mm) download ExactS