MakerWorld
Hueforge & Lithophane
Go to Model
Scarface
9
Downloads
6
Likes
4
Makes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 120x160mm in size You may print at higher layer heights below the Min Depth of 0.88mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA PolyLite Grey Transmission Distance: 1PLA BambuLab Basic Jade White Transmission Distance: 4.7 This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #13 (1.12mm) swap to Blue GrayAt layer #17 (1.44mm) swap to GreyAt layer #24 (2mm) swap to Jade White for the rest.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
