Scarlet Witch

This is wanda maximoff (scarlet witch) from marvel. this is based off a page from the comic book. the artist is luciano vecchio. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.64mmThe Max allowed Thickness is 2.4mm and the Actual Thickness is 2.32mmFilaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #f5547c PLA BambuLab Basic Hot Pink Transmission Distance: 3.9 #e2dedb PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Red At layer #15 (1.28mm) swap to Hot Pink At layer #17 (1.44mm) swap to White for the rest. Those are just the filaments i had on hand. use whatever you want.To scale it, change the x and y dimensions, do not change the z dimension. Boost Meboost me if you like my prints