Scary 4 HueForge

Classic characters together :-) Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 186.99x250mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 1.52mm and the Actual Thickness is 1.51911mmPLA Black Transmission Distance: 0.6PLA Red Transmission Distance: 2PLA Light Gray Transmission Distance: 1.7PLA White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #11 (0.96mm) swap to Light GrayBorder Only Colors from here until the end. At layer #17 (1.44mm) swap to White for the rest.