scary mummy

Project: scarymummy.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 1.3mmThe Max Depth is 3mm and the Actual Depth is 3.1mm Filaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA PolyLite Steel Grey Transmission Distance: 1PLA BambuLab Basic Beige Transmission Distance: 8PLA PolyLite Pro Cold White Transmission Distance: 0.5This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #21 (1.76mm) swap to Steel GreyAt layer #26 (2.16mm) swap to Beige Border Only Colors from here until the end.At layer #36 (2.96mm) swap to Cold White for the rest.