Schematic Luffy One Piece

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 138.07x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 3.1mmFilaments Used: PLA Smart Recycled Black Transmission Distance: 0.5 PLA Smart Recycled Red Transmission Distance: 4.4 PLA Smart Recycled Yellow Transmission Distance: 9.3 PLA Smart Recycled Orange Transmission Distance: 5.7 PLA Smart Recycled White Transmission Distance: 5.6This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Red At layer #18 (1.52mm) swap to Yellow At layer #34 (2.8mm) swap to Orange At layer #35 (2.88mm) swap to White for the rest.