Sci-Fi EDC Slider

A small sci-fi themed magnetic slider toy made for satisfying back-and-forth fidgeting. It is simple, tactile, and fun to play with, with a little snap as the slider moves from side to side. This was designed with children in mind, so the magnets are fully embedded inside the printed parts. That adds extra safety because the magnets are enclosed and cannot normally come loose during play. How it works The slider has one embedded magnet, and the housing has three embedded magnets. The two side magnets attract the slider so it snaps into place on either side. The middle housing magnet is flipped so it repels the slider magnet, pushing it away from the center and toward one of the side magnets. This gives the toy a simple but satisfying magnetic action without any loose parts. Included print profiles Print profiles are included for: 6x2mm magnets 6x3mm magnets 8x2mm magnets Please leave a comment if you need a print profile for another magnet size, or use the built-in Customizer by clicking the Customizer button. My personal recommendation is the 6x3mm magnet profile. Larger magnets can give a stronger snap, but they also make the whole toy larger. The 6x3mm size strikes the best balance between magnetic strength and overall size. Customizer guide A more detailed guide can be added if needed, but the basic workflow is: After exporting the STL or 3MF, open it in Bambu Studio. Split the object to parts. "Sub merge" the slider into its own assembly. These should be output_1_31 to output_1_34. Select "Lay on face" and click the top face with the power icon to lay it flat on the bed. For both the slider and the housing, change the magnet bodies to "Negative Part". They should be the first parts in each body. Check the highlighted outline to make sure the correct bodies are selected. For a single-color print, delete the detail bodies. These should be everything after the first body in the parts list. For a multi-color print, change the detail bodies to the second filament in