Thingiverse
Sci-Pi NAS
von niik
595
Downloads
439
Likes
5
Makes
Sci-Fi inspired Raspberry Pi 4 case.
This case design was based on the 3d art of LoneWolf3d (https://www.artstation.com/artwork/xNnOO)
The case currently has 2 versions.
A) holds one Pi 4, two 3.5 inch hard drives, and one 120mm fan.
B) holds three Pi 4's, three 3.5 inch hard drives, and one 120mm fan
Configuration A could be used to house a NAS
Configuration B could be used to house a PI cluster
Assembly is not too bad but in configuration "B" there is not much extra room.
I tried to remove extra material to reduce print time and plastic usage.
Print all the parts tagged for your configuration (A or B) and all the untagged parts
BOM:
| count | item | L min | L max |
|------- |------------------------------ |------- |------- |
| 8 | M4 Socket Cap | 40 | 45 |
| 8 | M4-Nut | ----- | ----- |
| 4~12 | #6-32 UNC | 4 | 6 |
| 4-12 | M3
This case design was based on the 3d art of LoneWolf3d (https://www.artstation.com/artwork/xNnOO)
The case currently has 2 versions.
A) holds one Pi 4, two 3.5 inch hard drives, and one 120mm fan.
B) holds three Pi 4's, three 3.5 inch hard drives, and one 120mm fan
Configuration A could be used to house a NAS
Configuration B could be used to house a PI cluster
Assembly is not too bad but in configuration "B" there is not much extra room.
I tried to remove extra material to reduce print time and plastic usage.
Print all the parts tagged for your configuration (A or B) and all the untagged parts
BOM:
| count | item | L min | L max |
|------- |------------------------------ |------- |------- |
| 8 | M4 Socket Cap | 40 | 45 |
| 8 | M4-Nut | ----- | ----- |
| 4~12 | #6-32 UNC | 4 | 6 |
| 4-12 | M3
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!