Thingiverse
scissors wallmount stand
by sashasaf
54
Downloads
43
Likes
0
Makes
You have to get a rod diameter 10 (or 8 or 6) mm and 160 mm long. Countersunk head screw; M3 x 8 mm x 2 and wide spacer M5 x 2 (put together). 1 round magnets diameter 12 mm and thickness 4 mm with hole diameter 4mm for screw M3. One iron plate 40x40 mm and some 3M adhesive tape.
Smaller version this thing here: https://www.thingiverse.com/thing:4189830
scissors_hole.STL & scissors_thread.STL = pair. Each pair can give 70-75 mm of distance at normal use and up to 85 mm of distance at extremal traction. At traction more than 75 mm very difficult to return it back.
Print a nut for each printed thread.
10_mm_wallmount.STL X 2, 10_mm_slider_hole_v2.STL X 1, 10_mm_slider_thread_v2.STL X 1 for rod 10 mm.
8_mm_wallmount.STL X 2, 8_mm_slider_hole_v2.STL X 1, 8_mm_slider_thread_v2.STL X 1 for rod 8 mm.
6_mm_wallmount.STL X 2, 6_mm_slider_hole_v2.STL X 1, 6_mm_slider_thread_v2.STL X 1 for rod 6 mm.
scissors_thread_short.STL X 1 & nut_m16x2.STL X 2 for each
magnet_stand.STL X 1
Scissors
Smaller version this thing here: https://www.thingiverse.com/thing:4189830
scissors_hole.STL & scissors_thread.STL = pair. Each pair can give 70-75 mm of distance at normal use and up to 85 mm of distance at extremal traction. At traction more than 75 mm very difficult to return it back.
Print a nut for each printed thread.
10_mm_wallmount.STL X 2, 10_mm_slider_hole_v2.STL X 1, 10_mm_slider_thread_v2.STL X 1 for rod 10 mm.
8_mm_wallmount.STL X 2, 8_mm_slider_hole_v2.STL X 1, 8_mm_slider_thread_v2.STL X 1 for rod 8 mm.
6_mm_wallmount.STL X 2, 6_mm_slider_hole_v2.STL X 1, 6_mm_slider_thread_v2.STL X 1 for rod 6 mm.
scissors_thread_short.STL X 1 & nut_m16x2.STL X 2 for each
magnet_stand.STL X 1
Scissors
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
