Thingiverse
Replacement Parts
Model downloaden
Scooba Handle
19
Downloads
20
Likes
1
Makes
This is a replacement handle and housing for the iRobot Scooba 390, so should also fit similar models 330, 350, 380, 385, 390.
The parts from the original handle assemply are required:
large clip with the 2 metal clips
(optional) L shaped metal clip which will need to be flattened and possibley rebent and shortened to fit, due to the thicker pegs. (See photo)
A 3mm diameter steel rod, 99mm long is also required.
This version should be stronger than the original as:
* the pegs on the underside of the handle are thicker and joined together.
* the 2 pivot shafts have been replaced by one long shaft.
* the shaft housing has been made thicker
The parts from the original handle assemply are required:
large clip with the 2 metal clips
(optional) L shaped metal clip which will need to be flattened and possibley rebent and shortened to fit, due to the thicker pegs. (See photo)
A 3mm diameter steel rod, 99mm long is also required.
This version should be stronger than the original as:
* the pegs on the underside of the handle are thicker and joined together.
* the 2 pivot shafts have been replaced by one long shaft.
* the shaft housing has been made thicker
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
