Search tips

core oneall words must appear
"core one"exact phrase
vase -lithophaneexclude a word
Slicer Discord
3DSEARCH / Hobby / Scorpio - Walking FPV drone
Scorpio - Walking FPV drone – 3D printable model from Thingiverse Thingiverse
Scorpio - Walking FPV drone – Bild 1 Scorpio - Walking FPV drone – Bild 2 Scorpio - Walking FPV drone – Bild 3 Scorpio - Walking FPV drone – Bild 4 Scorpio - Walking FPV drone – Bild 5 Scorpio - Walking FPV drone – Bild 6
Hobby

Scorpio - Walking FPV drone

by AlexKorvin · Hobby
469 Downloads
440 Likes
2 Makes
Go to Model
This is a walking FPV drone project.
Build video in Russian:
Part 1 - https://www.youtube.com/watch?v=YH8iq9J20Hc
Part 2 - https://www.youtube.com/watch?v=fyMJDvU5pt4

Firmware from this project - https://www.thingiverse.com/thing:3463845
Special thanks to Mark for his excellent firmware, and for his help in setting it up for my robot!

List of components:
1x Mega 2560 Pro Control Board - http://ali.pub/510vuw
18x Servo MG90:
Cheap (not recommended) - http://ali.pub/510vqf
Original - http://ali.pub/51wqaw
3x UBEC (5V, 3A) - https://alii.pub/6qdit0
1x Dual Cell Lipo Battery - http://ali.pub/510u8d
1x PS2 Gamepad with receiver - http://ali.pub/510vh3
JST Connectors - http://ali.pub/510ugc
18x Dupont Wires (Female to Female) - http://ali.pub/510unq
10x Cage nuts / bushings М3х4 - http://ali.pub/4suuwh
1x FPV camera RunCam Split 3 - http://ali.pub/510vnp
OR - Simple FPV Camera - http://ali.pub/4h6bz5
1x VTX - http://ali.pub/510tz8
1x My FPV Helmet - http://ali.pub/4h
Category
Hobby
Source
Thingiverse
Published
What you need to print this: Intermediate Medium confidence
Why?
very large print
Single piece Hardware needed May need scaling or splitting
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 3/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
Min. bed size
300 mm (Extra large)
Est. print time
4 h
Post-processing
Hardware
Software
Cura, PrusaSlicer, or similar
Frequently Asked Questions
Which 3D printer is suitable for Scorpio - Walking FPV drone?
Any FDM printer should handle Scorpio - Walking FPV drone just fine. It's been printed on machines like Bambu Lab X1C, Prusa MK4, Creality K1 Max, Anycubic Kobra Max. A minimum build volume of 300 mm is recommended.
How long does it take to print Scorpio - Walking FPV drone?
According to the design notes, Scorpio - Walking FPV drone takes approximately 4 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.
What file format is Scorpio - Walking FPV drone available in?
Scorpio - Walking FPV drone is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.
Is Scorpio - Walking FPV drone free to download?
Yes, Scorpio - Walking FPV drone is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
DIY Drone Transmitter
DIY Drone Transmitter
by Modern Hobbyist
↓ 151 ♥ 63
FPV WS2812B LED Box for Naze32 back led
FPV WS2812B LED Box for Naze32 back led
by PaoloRob
↓ 4 ♥ 4
Propeller Gun: FPV Prop Shooter
Propeller Gun: FPV Prop Shooter
by noahossa
↓ 44 ♥ 40
DRONE ONE
DRONE ONE
by fioravanti
↓ 1 ♥ 1
Propeller Dyno
Propeller Dyno
by klukasiuk
↓ 9 ♥ 3
RC FPV tank rover
RC FPV tank rover
by Bribro12
↓ 1.7k ♥ 1.3k
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
· Impressum · Privacy
DE EN FR ES IT NL

Add to Collection