scorpion hueforge

Another hueforge. A pause is enabled to change colors in AMS. Have fun and post pics of your prints! Project: scorpion.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x150mm in sizeYou may print at higher layer heights below the Base Thickness of 0.64mmThe Max allowed Thickness is 2.64mm and the Actual Thickness is 2.56mmFilaments Used: #080a0d PLA BambuLab Black Transmission Distance: 0.3 #482960 PLA BambuLab Basic Indigo Purple Transmission Distance: 1.1 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4.3 #ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 #e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 7 unique filamentsSwap Instructions: Start with BambuLab Black At layer #11 (0.96mm) swap to BambuLab Basic Indigo Purple At layer #12 (1.04mm) swap to BambuLab Basic R