Scorpion (mini hueforge)

Project: Scorpion.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 100x95.42mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.1mmFilaments Used: PLA Black Transmission Distance: 0.3 PLA White Transmission Distance: 5This print uses 2 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to White for the rest. Boost MeThank you for any support, likes, downloads or just follows.