Scott's Bowden Wade

I couldn't seem to find that right setup for my ideal bowden wade setup so I came up with this. It's a mash up from 3 other noted things found here. It uses the hardware used for Greg's Hinged Accessible Extruder.

The housing accepts PC4-M10 Male Straight Pneumatics. Ideally you'll want to push the tube through so that it almost touches the hobbed bolt on each side.

UPDATE: Redesigned the Wade Body and Idler to make better contact with hobbed bolt and filament.

Video: https://www.facebook.com/15487998541544i/videos/10212176440019265/

BOM:
Hobbed bolt
3 608 bearings
4 Washers
2 Nuts
2 Springs
Grub Screw
2 50mm Bolts
1 35mm Bolt
3 M3 Nuts
2 M3 Washers
3 M3x10mm Bolts
Dowel Rod

Can be purchased here or to get a better idea of what's needed: http://www.makerfarm.com/index.php/extruders/greg-s-hinged-accessible-extruder-hardware-only-no-printed-parts.html

Enjoy!