scrat hueforge

A pause is enabled to change fillament in ams Project: scrat1.hfpPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.12mm The Model is 200x195.6mm in sizeYou may print at higher layer heights below the Min Depth of 0.52mmThe Max Depth is 2.5mm and the Actual Depth is 2.5mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Brown Transmission Distance: 2PLA BambuLab Basic Black Transmission Distance: 0.3PLA BambuLab Basic Jade White Transmission Distance: 5PLA BambuLab Matte Ice Blue Transmission Distance: 3.5PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 5 unique filaments Swap Instructions:Start with BlackAt layer #28 (1.2mm) swap to BrownAt layer #32 (1.36mm) swap to BlackAt layer #33 (1.4mm) swap to Jade WhiteAt layer #34 (1.44mm) swap to BlackAt layer #35 (1.48mm) swap to Ice BlueAt layer #41 (1.72mm) swap to BrownAt layer #48 (2mm) swap to YellowAt layer #49 (2.04mm) swap to Jade White for the rest.