Scream 3 - hueforge

Hueforge of Scream 3The photos shows the result in 150.04x200mm and a nozzle of 0.4Boost MeThanks for your boost!You can change the X and Y dimensions but do not change the Z dimensions You must define the printing parameters indicated in the description below and change the filament on the indicated layers. You can use filaments other than those indicated, but the result will differ. You can use any black PLAHueforge descriptionPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 150.04x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.96mmThe Max allowed Thickness is 3.2mm and the Actual Thickness is 2.2mmFilaments Used: #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 #00358e PLA BambuLab Basic Blue Transmission Distance: 4This print uses 4 unique filamentsSwap Instructions: Start with R