Scream 6 - hueforge

Hueforge of Scream 6The photos shows the result in 135.38x200mm and a nozzle of 0.4Boost MeThanks for your boost!You can change the X and Y dimensions but do not change the Z dimensions You must define the printing parameters indicated in the description below and change the filament on the indicated layers. You can use filaments other than those indicated, but the result will differ. You can use any black PLAHueforge descriptionPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 135.38x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.64mmThe Max allowed Thickness is 2.88mm and the Actual Thickness is 1.24mm Filaments Used: #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 3 unique filaments Swap Instructions: Start with BambuLab Basic Red At layer #14 (0.68mm) swap to Bambu