Screen Pivot 2 for P1S

I spent a while with the original screen pivot that I had made, and as others pointed out, it was a little wobbly. I ran a few tests to get to this newer version. It's still not great but I think it's a large upgrade. Fillets have been added for support on the hinge, this should prevent wobble. The press fit part has also been changed to a slide on part to be more secure. BOM:Pivot Screen AttachmentPivot Mount Attachment Assembly:Remove the screen from the P1S by sliding it to the right. Be very careful here, I almost tore the cable doing this. Disconnect the wire.Unscrew the 2 screws (1.5mm hex driver) connecting the screen to the plastic mount (the thing that actually holds the screen to the printer).Press fit the body attachment part into the plastic mount.Use the 2 screws to attach the screen attachment to the screen.Loop the wire through the hole in the plastic mount/body attachment piece. Slide this piece back onto the P1S.Connect the wire to the screen. Attach the screen