Thingiverse
Screw Caps
von 3DPRINTINGWORLD
1.5k
Downloads
848
Likes
1
Makes
***Screw Caps***
These caps press on the head of Socket Head Cap Screws. There are three designs; knurled, lobed, and winged for either a M3 or M4 screw. Use a hammer, c-clamp, vice, or arbor press to press the caps on the head of the screw. The press needs to be between .005-.01" to work properly. Print one out and test it before you print out a bunch of them. If the fit is not correct scale the .stl slightly in your slicer to correct it.
These caps press on the head of Socket Head Cap Screws. There are three designs; knurled, lobed, and winged for either a M3 or M4 screw. Use a hammer, c-clamp, vice, or arbor press to press the caps on the head of the screw. The press needs to be between .005-.01" to work properly. Print one out and test it before you print out a bunch of them. If the fit is not correct scale the .stl slightly in your slicer to correct it.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
