Screwdriver holders (Flat/PH/TX/Hex)

The overall dimensions are replicated from the STL files of https://www.thingiverse.com/thing:2918462

I've customized the hole sizes and added new holders for the line of Craftsman acetate handled drivers which are widely available in the US. STLs are included for:
* Flat blade: 1/8", 3/16", 1/4" X 1.5", 1/4" X 6"
* Phillips: #0, #1, #2, #3
* Torx 10, 15, 20, 25, 30
* Hex: 3/16-in, 1/4-in, 5/16-in, 11/32-in, 3/8-in, 7/16-in, 1/2-in, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm

Printed from black PLA, and labels are hand painted. They're attached with #4 3/4" wood screws. Also included are DXF templates for mounting. I used 1/2" plywood and laser cut the mounting holes. I've shared a Fusion360 archive to make it easier to modify these. If exporting STLs from Fusion360, make sure to do so before the step in the timeline where they're aligned to the mounting board--for best printing results, the holder must sit at an angle on the print bed so that the label is flat.