Scrog mount

Scrog mounting design for one or more pieces of mesh to grow your herbs. Or peppers or something...

It is designed to fit on a DIY bubble bucket hydroponics / (R)DWC. It fits on a Euronorm bucket lid (30 x 40 cm). Of course you can also print only the upper parts and push the plant stakes into the soil.

In addition to the 3D printed parts, I used 11 mm plant sticks from the Hornbach, mesh with a thickness of 4 mm and a mesh size of 10 cm.

The bolts, nuts and washers used are:
- 4x M5 x 30
- 4x M5 nut
- 4x M5 Washer
- 4x M6 x 50
- 4x M6 x 20
- 4x M6 Nylock nut (so they don't fall off into the water)
- 4x M6 nut
- 8x big M6 washer
- 4x small M6 washer

Small explanation of the parts:

The drill tool is used as a mold to drill the bucket lid, as shown in the photo.

The lid part should be printed 4 times: 2x normal and 2x mirrored. Just like the Scrog mount parts.

To mount the mesh in Scrog mount, Scrog mount plate falls into the slot. Then the M5 x 30 mm bolt w